| PULMOR, EZ TO TOW YUPPIE TRAILERS FROM VERSA TRAILER. EASY TO PULL, LIGHTWEIGHT, BEHIND THE SMALLEST CARS. BUILT IN USA & CANADA | |||||
|
|||||
|
|
|||||
|
3 BRANDS OF ENCLOSED TRAILERS |
|||||
|
# 1YUPPIE WAGON # 2 VERSA TRAILER # 3 PULMOR |
|||||
|
|
|||||
 
# 1, YUPPIE
WAGON ENCLOSED TRAILERS FOR MOTORCYCLES,
hobbyists, outings, trips, school functions, campers,
FARM MARKET, BREAD STORES, MUSHROOM FARM, ETC. WE HAVE
YOU COVERED ! |
|||||
|
|
|||||
 
Description of Yuppie Wagon Trailer
The Yuppie Wagon is a great, cost effective option to secure and protect your
items. The Yuppie Wagon can be easily handled and hitched by one person and can be pulled by any vehicle, including a standard ATV on rough terrain. It has an aerodynamic shape that reduces wind resistance, a rugged steel frame, rot-proof, rust-proof shell, and is available in 5 colors - Red, Yellow, Dark Green, Black & Grey.
4 ft. wide x 7 ft. long, weight 399 lb. equipped with a
torsion axle with ez lube hubs as standard equipment.
AAll the best is standard. |
|||||
|
|
|||||
| YUPPIE WAGON Key Specs | |||||
|
|||||
|
|
|||||
 
WE
ALSO
MAKE
A
CAMPER
MODEL
IN
BOTH
THE
4
FT.
X 7
FT.
AND
THE
5
FT.
X 10
FT.
LONG
MODEL.WE SELL SO LOW THAT MOST PEOPLE CAN FINANCE THE FULL AMOUNT, WITH NOTHING DOWN. VISIT OUR WEBSITE WITH THE PRICES, SPECIFICATIONS, AND LOTS OF PHOTOS, CLICK HERE |
|||||
|
|
|||||
 Included Free: FREE EZ Lube Hubs AND RUBBER RIDE TORSION AXLE. Simple to refill and saves you hundreds of dollars over the life of your trailer. STANDARD ON MOST, YUPPIE WAGON, PULMOR, VERSA TRAILERS |
|||||
|
|
|||||
 Included Free:
RUBBER
RIDE TORSION AXLE.70 % SMOOTHER RIDE ! STANDARD ON MOST, YUPPIE WAGON, PULMOR, VERSA TRAILERS |
|||||
|
|
|||||
Included Free: TONGUE HANDLE, AND UNDER TONGUE COUPLER
GUARD, AND SAFETY CHAINS. 4 FLAT WIRING,
STANDARD ON MOST, YUPPIE WAGON, PULMOR, VERSA
TRAILERS |
|||||
|
|
|||||
 POPULAR Optional Accessories:
|
|||||
|
|
|||||
 Spare Tire & Wheel: Better safe than sorry. This is a spare 12" tire and wheel with the white rim. Can be simply stored inside the trailer or on the Spare Tire Carrier listed below. OPTION: ON, YUPPIE WAGON, PULMOR, VERSA TRAILERS |
|||||
|
|
|||||
 Spare Tire Carrier: Mounts to the tongue of the trailer. OPTION: ON, YUPPIE WAGON, PULMOR, VERSA TRAILERS |
|||||
|
|
|||||
 Tilt-Up Tongue Jack with Rolling Wheel: Convenient way to move your trailer when you take it off the hitch. Trailer rolls along very easily. OPTION: ON, YUPPIE WAGON, PULMOR, VERSA TRAILERS |
|||||
|
|
|||||
 What is the EZ Open Rear Door Ramp?
This option allows you to open / close the rear ramp
very easily by only applying 8 oz or so of pressure. You
do not even need to bend over to lift the door. Simply
use your foot to tip it up and the spring operated door
will automatically close. Most of our customers thank us
for recommending this option to them.
WATCH MOVIE, CLICK HERE |
|||||
|
|
|||||
 Shipping Explained: ALL BRANDS.Freight Delivery: If your trailer is going to a business AND the business has a dock. You will only need to pay the $399 for freight delivery. The drop lift gate will not be required. YOU MAY ALSO PICK UP AT TRUCKING COMPANY IN YOUR LOCAL AREA. OR YOU NEED A HITCH, ? WE CAN SHIP TO A U-HAUL HITCH STORE NEAR YOU. |
|||||
|
|
|||||
 Home Delivery Drop Gate: If your trailer is going to a residential address, you will be required to pay the extra $136 for the drop gate. The drop gate lowers the heavy trailer on the pallet down off the freight truck for you. |
|||||
|
|
|||||
  We have been manufacturing the Yuppie Wagon now
since 2003, and
have enjoyed seeing it's popularity increase. Now, we would like to
introduce an addition to the Yuppie Wagon concept:
THE JIM YUPPIE TRAILER 4 FT WIDE WITH 7 FT. 2
INCH CENTER LINE AND A 6' SIDE WALL LENGTH AND IS FITTED
WITH A REAR RAMP DOOR OR SWING OPEN DOOR. , 3 FT. WIDE
41 INCHES TALL AND THE EZ LUBE SYSTEM IS STANDARD EQUIPMENT. |
|||||
|
|
|||||
the Yuppie Wagon
TRAILERS can be used to haul motorcycles,
DIRT BIKE, CAMPING EQUIPMENT, JUST ABOUT ANYTHING YOU
WANT TO USE IT FOR. ADD A RACK AND CARRY MINI PONTOONS,
CANOES, KAYAKS, LUMBER, LUGGAGE, ETC.. AND CAN BE EQUIPPED WITH A 3500 LB. AXLE.HERE IS OF A CUSTOMER PICKING UP A 16 FT. SQUARE STERN OSAGIAN CANOE WITH A YUPPIE WAGON TRAILER WITH A CANOE RACK. IT PROVIDES A SAFE STABLE MOUNT TO BE ATTACHED TO AND AS MOUNTED ONLY 3 FT. EXTENDS OUT THE BACK. IT IS LEGAL TO CARRY DAY OR NIGHT IN MOST STATES. |
|||||
|
Yuppie Wagon™ is your perfect traveling companion: it works hard and never talks back or knows a better road to take than the one you're on. Whether your running a race, running the road or running away for the weekend, the Yuppie Wagon™ is always behind you. So easy to set up, durable, lightweight and aerodynamic, you may forget your being followed. |
|||||
|
|
|||||
 YUPPIE WAGON TRAILER CARRYING A BASS BABY BASS HUNTER MINI PONTOON BOAT.
The Yuppie Wagon™ is a lightweight, completely enclosed,
affordable trailer that easily pulls behind almost any vehicle. The
Yuppie Wagon™ is ideal for many recreational activities including:
camping, fishing, BOATING, KAYAKING, family vacations, little league teams, boy/girl scout
troops, and many more. The REASON IT IS SUCH
QUALITY IS THE one-piece, rotationally molded, polyethylene
shell is ALSO leak, rust and dent proof.
|
|||||
| NOW available is the Yuppie JIM TRAILER with a ramp door! Now you can haul your motorcycle with ease. Look below to see pictures and read more about this new version of the Yuppie Wagon™. | |||||
|
On these pages you will find all of the information you need to learn about the Yuppie Wagon™ VISIT OUR WEBSITE WITH THE PRICES AND LOTS OF PHOTOS, CLICK HERE |
|||||
|
|
|||||
SEE THE PUNISHMENT WITH A 20
LB SLEDGE HAMMER THAT OUR ROTO MOLDED TRAILER SHELL COVERS
CAN TAKE. WE EVEN RUN IN TO IT SIDEWAYS
WITH A 6000 LB TRACTOR ! |
|||||
|
|
|||||
 You will find that the Yuppie Wagon™ is a very versatile
trailer, which can be used for many types of occasions. Its
rugged, weather-proof design will keep your valuable things dry.
Also, since the shell is at least a 1/4" of an inch thick, your
things will also be very safe. Its aerodynamic shape helps it
tuck right in behind any car, truck or SUV with at least a Class
II trailer hitch. |
|||||
 When equipped with a ramp door, the Yuppie
becomes even more versatile, acquiring the ability to haul most
motorcycles, and at a fraction of the cost of other fully
enclosed trailers. This version of the Yuppie JIM TRAILER is
available exclusively through OUR DEALER NETWORK. |
|||||
|
Take a look at these pictures: |
|||||
 Yuppie Wagon™'s are great for group picnics, outings and trips,
school functions, hobbyists, campers and hunters.CHURCH GROUPS, CLUBS, FOOD BANKS, SPORTS TEAMS LOVE ALL OUR TRAILERS. |
|||||
|
|
|||||
  Because of its light tongue-weight (46lbs.) and small size,
the Yuppie Wagon™ is extremely easy to hitch up!TOWS EASY WITH EVEN THE SMALLEST OF VEHICLES. WATCH MOVIE HERE |
|||||
|
|
|||||
 
OUR TRAILER ARE ALL EASY TO PULL
SMALL CARS PULL OUR TRAILERS WITH EASE. THE YUPPIE WAGON WILL USUALLY HOLD
1 HANDICAPPED SCOOTER AND 1 LARGE POWER CHAIR. |
|||||
|
|
|||||
|
THE
YUPPIE TRAILER 4 FT WIDE WITH 7 FT. 2 INCH CENTER LINE
AND A 6' SIDE WALL LENGTH AND IS FITTED WITH A REAR
RAMP DOOR, OR SWING OPEN DOOR. TOWS EASY WITH
EVEN THE SMALLEST OF VEHICLES.
WATCH MOVIE
HERE |
|||||
|
|
|||||
 Single 2000-lb axle; spring suspension, five-bolt, 4.5" bolt pattern; 2" ball coupler; 5/8" treated plywood floor; 7'2" length, 4 FT. width for the shell. TRAILER FRAME OVERALL LENGTH IS 10 FT. height overall 4' height for the interior; a single rear door with 36" width and 41" height; GVWR of 1404 lb; and payload capacity of 944 lb. WITH 4.80 X 12: B TIRES. CLICK HERE TO WATCH MOVIE ON OUR EZ OPEN / CLOSE REAR RAMP THAT IS ONLY $349.95 ON A NEW YUPPIE WAGON OR EZ TO TOW VERSA TRAILER. |
|||||
|
|
|||||
 BELOW ARE THE EZ TO TOW AND YUPPIE WAGON
REAR RAMP HANDICAPPED MOBILITY TRAILERS.VISIT OUR WEBSITE WITH THE PRICES AND LOTS OF PHOTOS, CLICK HERE |
|||||
 
CLICK HERE TO WATCH MOVIE ON EASY OPEN / CLOSE REAR RAMP EZ TOW AND YUPPIE WAGON TRAILERS ARE USED TO CARRY MOBILITY SCOOTERS & POWER CHAIRS ALL OVER THE WORLD. |
|||||
|
|
|||||
| IF YOUR TRAILERS FULL OF GEAR OR HANDICAPPED EQUIPMENT AND YOU NEED EXTRA ROOM ADD A CARGO CARRIER. | |||||
 YUPPIE WAGON WITH CARGO CARRIER MOUNTED ON TOP.
WATCH MOVIE, OPENING AND CLOSING CLICK HERE |
|||||
|
|
|||||
 YUPPIE
WAGON TRAILERS ARE AVAILABLE WITH GALVANIZED FRAMES.
EXTENDED TONGUES, ETC.
SPECIAL ORDERS CALL |
|||||
|
|
|||||
 
THE VERSA LIMO TRAILER ALWAYS BACKS UP
STRAIGHT. |
|||||
|
|
|||||
|
|
|||||
 TONY
K. FROM HIGHLAND PARK, MI. WRITES US.
Pulls very light behind my Prius. First trip was 44 MPG
@ 55 mph. |
|||||
|
|
|||||
 |
|||||
| ADD A TENT TO ANY OF OUR YUPPIE WAGON AND VERSA REAR LOAD CARGO BOX TRAILERS. | |||||
|
|
|||||
|
|
|||||
|
# 2 IS THE VERSA OPEN OR ENCLOSED CARGO TRAILER |
|||||
  WE HAVE A MODEL FOR YOU ! |
|||||
|
|
|||||
VERA TRAILER STARTED THE SMALL TRAILER
RAGE AND IS THE # 1 COPIED TRAILER IN THE WORLD. IT JUST
GOT BETTER ! NOW WITH 70% SMOOTHER RIDE RUBBER TORSION
AXLE WITH EZ LUBE HUBS IS STANDARD EQUIPMENT.
|
|||||
|
QUALITY BUILD IN, NOT ADDED ON ! |
|||||
|
|
|||||
VERSA TRAILER OFFERS CARGO BOXES 2 TO 3 TIMES LARGER
THAN ANY ONE ELSE. 32 AND 42 CUBIC FT. MODELS.NEED MORE SPACE ? BUY OUR 107 CUBIC FT. YUPPIE WAGON ! CLICK HERE |
|||||
|
|
|||||
  |
|||||
|
|
|||||
VERSA 32 CU. FT. OR OUR LARGER 42 CU. FT. CARGO BOX FIT
ON A 4 X 5 FT. OR LONGER OR WIDER TRAILER.AVAILABLE AT OVER 2000 DEALERS IN THE USA AND CANADA |
|||||
|
|
|||||
CARGO BOXES WE HAVE BUILT FOR
OVER 40 YEARS, ADD CARGO LOAD BARS ! AS PICTUREDVISIT OUR WEBSITE WITH THE PRICES AND LOTS OF PHOTOS, CLICK HERE |
|||||
|
|
|||||
VERSA 32 CU. FT. 26" INCH HIGH INSIDE, OR OUR LARGER 42 CU. FT.
32" INSIDE CARGO BOX ON A
4 X 5 FT. TRAILER .AVAILABLE AT OVER 2000 DEALERS IN THE USA AND CANADA. |
|||||
|
|
|||||
PHOTOS BATTERY BOX ACCESSORY MOUNTED IN FRONT OF OUR
VERSA 32 CU. FT. CARGO BOX ON A 4 X 5 FT. TRAILER
AVAILABLE AT OVER 2000 DEALERS IN THE USA AND CANADA. |
|||||
|
|
|||||
VERSA V FRAME TRAILER WITH VEE BOX IN
FRONT OF VERSA 32 CU. FT. LUGGAGE BOX UNIT.42 CUBIC FT. MODEL ALSO AVAILABLE. VEE BOX IS 35 X 18 X 18 INCHES. |
|||||
|
|
|||||
VEE BOX CAN BE MOUNTED, ON
THE FRAME, AS IN PHOTO, OR TONGUE MOUNTED OR
RECEIVER MOUNTED ON THE REAR OF TRAILER.VEE BOX IS 35 X 18 X 18 INCHES. |
|||||
|
|
|||||
VERSA CARGO BOX IS AVAILABLE IN 42,
AND 32 CUBIC FOOT SIZES.32 CUBIC FT. IN PHOTO WITH A VEE BOX IN FRONT. |
|||||
|
|
|||||
VERSA CARGO BOX OPEN SHOWS LOTS
OF SPACE FOR ALL YOUR EQUIPMENT. |
|||||
|
|
|||||
| VISIT OUR WEBSITE WITH THE PRICES AND LOTS OF PHOTOS, CLICK HERE | |||||
|
|
|||||
| NEW VERSA ULTRA LIGHT 42 CU. FT. REAR LOADER, WITH CAMPER OPTION MODEL FOR YOUR TRAILER OR OURS ! | |||||
|
|
|||||
| NEW VERSA ULTRA LIGHT 32 CU. FT. 26" HIGH INSIDE MODEL FOR , TRIKES, MOTORCYCLES AND SMALL CARS | |||||
|
|
|||||
| VERSA ULTRA LIGHT 42 CU. FT. MODEL FOR , SMALL CARS, TO THE LARGEST OF VEHICLES! IT IS A LOT OF CARRYING SPACE. BIG ENOUGH EVEN FOR LARGE COOLER CHESTS! | |||||
|
|
|||||
| NEW VERSA ECONOMY ULTRA LIGHT 16 CU. FT. WITH ROOF RACK MODEL FOR , TRIKES, MOTORCYCLES AND SMALL CARS, AND BICYCLES. THIS IS THE ULTIMATE SMALL TRAILER THAT IS FULL FEATURED. VISIT OUR WEBSITE WITH THE PRICES AND LOTS OF PHOTOS, CLICK HERE | |||||
|
|
|||||
|
# 3 IS THE PULMOR LUGGAGE TRAILER |
|||||
|
|
|||||
|
COLORS ARE RED, BLACK, GRAY, YELLOW, DARK GREEN |
|||||
  THE
PULMOR IS OUR 440 LB. LIGHTWEIGHT, LOW PROFILE TRAILER.
70 INCHES LONG INSIDE, 18 INCHES HIGH, 40 INCHES WIDE,
EASY TO PULL ROTO MOLDED TRAILER.
SALE ON NOW ! ROTO MOLDED GRAY TOP AVAILABLE IN GRAY, BLACK, YELLOW, RED, DARK WOODLAND GREEN BODY COLORS. |
|||||
|
|
|||||
  |
|||||
| THE PULMOR IS AVAILABLE WITH A ALL ALUMINUM ROOF RACK, BOLTED THRU THE LID IN SPECIAL MOUNTING AREAS THAT ALSO WILL ACCEPT THE COMMERCIAL RACKS PICTURED ON THE YELLOW TRAILER. | |||||
  |
|||||
|
|
|||||
 THE
PULMOR IS AVAILABLE WITH A OPTIONAL REAR RECEIVER THAT
WILL CARRY BIKE, REAR PLATFORM, REAR MOUNT TAILGATER
GRILL AND MOST OTHER 1 1/4 OR 2 INCH ACCESSORY. |
|||||
|
THE PULMOR TRAILER CARRIES LOTS A LUGGAGE, CAMPING GEAR, EQUIPMENT. |
|||||
|
|
|||||
  |
|||||
| SOLAR POWER PANEL OPTION AS ON LEFT PHOTO, AND BELOW. | |||||
| SOLAR PANEL BEING INSTALLED ON PULMOR TRAILER LID | |||||
 |
|||||
| CUSTOM BUILT TO FIT YOUR SPECIFICATIONS. | |||||
|
|
|||||
  |
|||||
| PULMOR GALVANIZED TRAILERS IN 2005 HAD SPRING AXLES. | |||||
| CURRENT MODELS ARE TORSION AXLE, WITH EZ LUBE HUBS. LOW PROFILE AERODYNAMIC, VERY EASY TO PULL WITH SMALL CARS. | |||||
SPECIFICATIONSFrame
Body and OPTIONAL Removable Lid
Dimensions
All dimensions are approximate. Dimensions and specifications are subject to change without notice. |
|||||
|
|
|||||
 roto-molded
information with MOVIE OF ROTO MOLDING ITEMS.
The Yuppie Wagon, EZ TOW AND PULMOR TRAILER shell is roto-molded and then sent to one of MANY OF THE TRAILER FRAME manufacturers in NORTH AMERICA. They manufacture the trailer FRAME, put the Yuppie shell on it, and then sell it to their distribution network. since 1996, the company has been one of the few companies in the world to house a Roto-Molding machine. Rotational molding produces plastic parts in a variety of shapes, sizes, and colors that other processes do not have the flexibility to produce. |
|||||
|
The molding
process WATCH MOVIE OF MAKING
OUR PRODUCTS
CLICK HERE The rotational molding process starts with a mold that is placed in a molding machine that has a loading, heating, and cooling area. Pre-measured plastic resin is loaded into each mold, and then the molds go into the oven, where they are slowly rotated on both the vertical and horizontal axis. The melting resin sticks to the hot mold and coats every surface evenly. The mold continues to rotate during the cooling cycle, ensuring an even-wall thickness. Once the parts are cooled, they are released from the mold. The rotational speed, heating, and cooling times are all controlled throughout the molding process. |
|||||
|
|
|||||
|
|
|||||
| Additives to help make the part weather resistant, flame retardant, or static free can be specified. colors added to the mixture are even through OUT the material so scratches do not turn white AS WHAT HAPPENS WITH MOST OTHER PRODUCTS THAT HAVE A FINISH ON THEM. Inserts, threads, handles, minor undercuts, flat surfaces that eliminate draft angles, or fine surface detail can all be part of the design. | |||||
| Compared to injection and blow molding, rotational molding can easily produce large and small parts in a cost effective manner. Tooling is less expensive because there's no internal core to manufacture, which also means minor changes can easily be made to an existing mold. And because parts are formed with heat and rotation, rather than pressure, molds don't need to be engineered to withstand the high pressure of injection molding | |||||
|
CONCLUSION: THE CUSTOMER GETS A BETTER LONGER LIFE, MORE MAINTENANCE FREE PRODUCT AT ABOUT 1/3 THE COST OF PRODUCTS DONE BY OLDER PROCESSES. |
|||||
|
|
|||||
|
.jpg)
